Skip to main content

Flow Access API Specification

The Access API is implemented as a gRPC service.

A language-agnostic specification for this API is defined using Protocol Buffers, which can be used to generate client libraries in a variety of programming languages.

Flow Access Node Endpoints

NetworkGRPCWeb GRPCREST
Mainnetaccess.mainnet.nodes.onflow.org:9000mainnet.onflow.orgrest-mainnet.onflow.org
Testnetaccess.devnet.nodes.onflow.org:9000testnet.onflow.orgrest-testnet.onflow.org
Previewnetaccess.previewnet.nodes.onflow.org:9000previewnet.onflow.orgrest-previewnet.onflow.org

Ping

Ping will return a successful response if the Access API is ready and available.


_10
rpc Ping(PingRequest) returns (PingResponse)

If a ping request returns an error or times out, it can be assumed that the Access API is unavailable.

Request


_10
message PingRequest {}

Response


_10
message PingResponse {}


Block Headers

The following methods query information about block headers.

GetLatestBlockHeader

GetLatestBlockHeader gets the latest sealed or unsealed block header.


_10
rpc GetLatestBlockHeader (GetLatestBlockHeaderRequest) returns (BlockHeaderResponse)

Request


_10
message GetLatestBlockHeaderRequest {
_10
bool is_sealed
_10
}

Response


_10
message BlockHeaderResponse {
_10
flow.BlockHeader block
_10
flow.BlockStatus block_status
_10
}

GetBlockHeaderByID

GetBlockHeaderByID gets a block header by ID.


_10
rpc GetBlockHeaderByID (GetBlockHeaderByIDRequest) returns (BlockHeaderResponse)

Request


_10
message GetBlockHeaderByIDRequest {
_10
bytes id
_10
}

Response


_10
message BlockHeaderResponse {
_10
flow.BlockHeader block
_10
flow.BlockStatus block_status
_10
}

GetBlockHeaderByHeight

GetBlockHeaderByHeight gets a block header by height.


_10
rpc GetBlockHeaderByHeight (GetBlockHeaderByHeightRequest) returns (BlockHeaderResponse)

Request


_10
message GetBlockHeaderByHeightRequest {
_10
uint64 height
_10
}

Response


_10
message BlockHeaderResponse {
_10
flow.BlockHeader block
_10
flow.BlockStatus block_status
_10
}


Blocks

The following methods query information about full blocks.

GetLatestBlock

GetLatestBlock gets the full payload of the latest sealed or unsealed block.


_10
rpc GetLatestBlock (GetLatestBlockRequest) returns (BlockResponse)

Request


_10
message GetLatestBlockRequest {
_10
bool is_sealed
_10
}

Response


_10
message BlockResponse {
_10
flow.Block block
_10
flow.BlockStatus block_status
_10
}

GetBlockByID

GetBlockByID gets a full block by ID.


_10
rpc GetBlockByID (GetBlockByIDRequest) returns (BlockResponse)

Request


_10
message GetBlockByIDRequest {
_10
bytes id
_10
}

Response


_10
message BlockResponse {
_10
flow.Block block
_10
flow.BlockStatus block_status
_10
}

GetBlockByHeight

GetBlockByHeight gets a full block by height.


_10
rpc GetBlockByHeight (GetBlockByHeightRequest) returns (BlockResponse)

Request


_10
message GetBlockByHeightRequest {
_10
uint64 height
_10
}

Response


_10
message BlockResponse {
_10
flow.Block block
_10
flow.BlockStatus block_status
_10
}


Collections

The following methods query information about collections.

GetCollectionByID

GetCollectionByID gets a collection by ID.


_10
rpc GetCollectionByID (GetCollectionByIDRequest) returns (CollectionResponse)

Request


_10
message GetCollectionByIDRequest {
_10
bytes id
_10
}

Response


_10
message CollectionResponse {
_10
flow.Collection collection
_10
}


Transactions

The following methods can be used to submit transactions and fetch their results.

SendTransaction

SendTransaction submits a transaction to the network.


_10
rpc SendTransaction (SendTransactionRequest) returns (SendTransactionResponse)

SendTransaction determines the correct cluster of collection nodes that is responsible for collecting the transaction based on the hash of the transaction and forwards the transaction to that cluster.

Request

SendTransactionRequest message contains the transaction that is being request to be executed.


_10
message SendTransactionRequest {
_10
flow.Transaction transaction
_10
}

Response

SendTransactionResponse message contains the ID of the submitted transaction.


_10
message SendTransactionResponse {
_10
bytes id
_10
}

GetTransaction

GetTransaction gets a transaction by ID.

If the transaction is not found in the access node cache, the request is forwarded to a collection node.

Currently, only transactions within the current epoch can be queried.


_10
rpc GetTransaction (GetTransactionRequest) returns (TransactionResponse)

Request

GetTransactionRequest contains the ID of the transaction that is being queried.


_10
message GetTransactionRequest {
_10
bytes id
_10
}

Response

TransactionResponse contains the basic information about a transaction, but does not include post-execution results.


_10
message TransactionResponse {
_10
flow.Transaction transaction
_10
}

GetTransactionResult

GetTransactionResult gets the execution result of a transaction.


_10
rpc GetTransactionResult (GetTransactionRequest) returns (TransactionResultResponse)

Request


_10
message GetTransactionRequest {
_10
bytes id
_10
}

Response


_10
message TransactionResultResponse {
_10
flow.TransactionStatus status
_10
uint32 status_code
_10
string error_message
_10
repeated flow.Event events
_10
}


Accounts

GetAccount

GetAccount gets an account by address at the latest sealed block.

⚠️ Warning: this function is deprecated. It behaves identically to GetAccountAtLatestBlock and will be removed in a future version.


_10
rpc GetAccount(GetAccountRequest) returns (GetAccountResponse)

Request


_10
message GetAccountRequest {
_10
bytes address
_10
}

Response


_10
message GetAccountResponse {
_10
Account account
_10
}

GetAccountAtLatestBlock

GetAccountAtLatestBlock gets an account by address.

The access node queries an execution node for the account details, which are stored as part of the sealed execution state.


_10
rpc GetAccountAtLatestBlock(GetAccountAtLatestBlockRequest) returns (AccountResponse)

Request


_10
message GetAccountAtLatestBlockRequest {
_10
bytes address
_10
}

Response


_10
message AccountResponse {
_10
Account account
_10
}

GetAccountAtBlockHeight

GetAccountAtBlockHeight gets an account by address at the given block height.

The access node queries an execution node for the account details, which are stored as part of the execution state.


_10
rpc GetAccountAtBlockHeight(GetAccountAtBlockHeightRequest) returns (AccountResponse)

Request


_10
message GetAccountAtBlockHeightRequest {
_10
bytes address
_10
uint64 block_height
_10
}

Response


_10
message AccountResponse {
_10
Account account
_10
}

Scripts

ExecuteScriptAtLatestBlock

ExecuteScriptAtLatestBlock executes a read-only Cadence script against the latest sealed execution state.

This method can be used to read execution state from the blockchain. The script is executed on an execution node and the return value is encoded using the JSON-Cadence data interchange format.


_10
rpc ExecuteScriptAtLatestBlock (ExecuteScriptAtLatestBlockRequest) returns (ExecuteScriptResponse)

This method is a shortcut for the following:


_10
header = GetLatestBlockHeader()
_10
value = ExecuteScriptAtBlockID(header.ID, script)

Request


_10
message ExecuteScriptAtLatestBlockRequest {
_10
bytes script
_10
}

Response


_10
message ExecuteScriptResponse {
_10
bytes value
_10
}

ExecuteScriptAtBlockID

ExecuteScriptAtBlockID executes a ready-only Cadence script against the execution state at the block with the given ID.

This method can be used to read account state from the blockchain. The script is executed on an execution node and the return value is encoded using the JSON-Cadence data interchange format.


_10
rpc ExecuteScriptAtBlockID (ExecuteScriptAtBlockIDRequest) returns (ExecuteScriptResponse)

Request


_10
message ExecuteScriptAtBlockIDRequest {
_10
bytes block_id
_10
bytes script
_10
}

Response


_10
message ExecuteScriptResponse {
_10
bytes value
_10
}

ExecuteScriptAtBlockHeight

ExecuteScriptAtBlockHeight executes a ready-only Cadence script against the execution state at the given block height.

This method can be used to read account state from the blockchain. The script is executed on an execution node and the return value is encoded using the JSON-Cadence data interchange format.


_10
rpc ExecuteScriptAtBlockHeight (ExecuteScriptAtBlockHeightRequest) returns (ExecuteScriptResponse)

Request


_10
message ExecuteScriptAtBlockHeightRequest {
_10
uint64 block_height
_10
bytes script
_10
}

Response


_10
message ExecuteScriptResponse {
_10
bytes value
_10
}


Events

The following methods can be used to query for on-chain events.

GetEventsForHeightRange

GetEventsForHeightRange retrieves events emitted within the specified block range.


_10
rpc GetEventsForHeightRange(GetEventsForHeightRangeRequest) returns (GetEventsForHeightRangeResponse)

Events can be requested for a specific sealed block range via the start_height and end_height (inclusive) fields and further filtered by event type via the type field.

If start_height is greater than the current sealed chain height, then this method will return an error.

If end_height is greater than the current sealed chain height, then this method will return events up to and including the latest sealed block.

The event results are grouped by block, with each group specifying a block ID, height and block timestamp.

Event types are name-spaced with the address of the account and contract in which they are declared.

Request


_10
message GetEventsForHeightRangeRequest {
_10
string type
_10
uint64 start_height = 2;
_10
uint64 end_height = 3;
_10
}

Response


_10
message EventsResponse {
_10
message Result {
_10
bytes block_id = 1;
_10
uint64 block_height = 2;
_10
repeated entities.Event events = 3;
_10
google.protobuf.Timestamp block_timestamp = 4;
_10
}
_10
repeated Result results = 1;
_10
}

GetEventsForBlockIDs

GetEventsForBlockIDs retrieves events for the specified block IDs and event type.


_10
rpc GetEventsForBlockIDs(GetEventsForBlockIDsRequest) returns (GetEventsForBlockIDsResponse)

Events can be requested for a list of block IDs via the block_ids field and further filtered by event type via the type field.

The event results are grouped by block, with each group specifying a block ID, height and block timestamp.

Request


_10
message GetEventsForBlockIDsRequest {
_10
string type = 1;
_10
repeated bytes block_ids = 2;
_10
}

Response


_10
message EventsResponse {
_10
message Result {
_10
bytes block_id = 1;
_10
uint64 block_height = 2;
_10
repeated entities.Event events = 3;
_10
google.protobuf.Timestamp block_timestamp = 4;
_10
}
_10
repeated Result results = 1;
_10
}


Network Parameters

Network parameters provide information about the Flow network. Currently, it only includes the chain ID. The following method can be used to query for network parameters.

GetNetworkParameters

GetNetworkParameters retrieves the network parameters.


_10
rpc GetNetworkParameters (GetNetworkParametersRequest) returns (GetNetworkParametersResponse)

Request


_10
message GetNetworkParametersRequest {}

Response


_10
message GetNetworkParametersResponse {
_10
string chain_id = 1;
_10
}

FieldDescription
chain_idChain ID helps identify the Flow network. It can be one of flow-mainnet, flow-testnet or flow-emulator

Protocol state snapshot

The following method can be used to query the latest protocol state snapshot.

GetLatestProtocolStateSnapshotRequest

GetLatestProtocolStateSnapshotRequest retrieves the latest Protocol state snapshot serialized as a byte array. It is used by Flow nodes joining the network to bootstrap a space-efficient local state.


_10
rpc GetLatestProtocolStateSnapshot (GetLatestProtocolStateSnapshotRequest) returns (ProtocolStateSnapshotResponse);

Request


_10
message GetLatestProtocolStateSnapshotRequest {}

Response


_10
message ProtocolStateSnapshotResponse {
_10
bytes serializedSnapshot = 1;
_10
}

Execution results

The following method can be used to query the for execution results for a given block.

GetExecutionResultForBlockID

GetExecutionResultForBlockID retrieves execution result for given block. It is different from Transaction Results, and contain data about chunks/collection level execution results rather than particular transactions. Particularly, it contains EventsCollection hash for every chunk which can be used to verify the events for a block.


_10
rpc GetExecutionResultForBlockID(GetExecutionResultForBlockIDRequest) returns (ExecutionResultForBlockIDResponse);

Request


_10
message GetExecutionResultForBlockIDRequest {
_10
bytes block_id = 1;
_10
}

Response


_10
message ExecutionResultForBlockIDResponse {
_10
flow.ExecutionResult execution_result = 1;
_10
}

Entities

Below are in-depth descriptions of each of the data entities returned or accepted by the Access API.

Block


_10
message Block {
_10
bytes id
_10
bytes parent_id
_10
uint64 height
_10
google.protobuf.Timestamp timestamp
_10
repeated CollectionGuarantee collection_guarantees
_10
repeated BlockSeal block_seals
_10
repeated bytes signatures
_10
}

FieldDescription
idSHA3-256 hash of the entire block payload
heightHeight of the block in the chain
parent_idID of the previous block in the chain
timestampTimestamp of when the proposer claims it constructed the block.
NOTE: It is included by the proposer, there are no guarantees on how much the time stamp can deviate from the true time the block was published.
Consider observing blocks' status changes yourself to get a more reliable value.
collection_guaranteesList of collection guarantees
block_sealsList of block seals
signaturesBLS signatures of consensus nodes

The detailed semantics of block formation are covered in the block formation guide.

Block Header

A block header is a summary of a block and contains only the block ID, height, and parent block ID.


_10
message BlockHeader {
_10
bytes id
_10
bytes parent_id
_10
uint64 height
_10
}

FieldDescription
idSHA3-256 hash of the entire block payload
parent_idID of the previous block in the chain
heightHeight of the block in the chain

Block Seal

A block seal is an attestation that the execution result of a specific block has been verified and approved by a quorum of verification nodes.


_10
message BlockSeal {
_10
bytes block_id
_10
bytes execution_receipt_id
_10
repeated bytes execution_receipt_signatures
_10
repeated bytes result_approval_signatures
_10
}

FieldDescription
block_idID of the block being sealed
execution_receipt_idID execution receipt being sealed
execution_receipt_signaturesBLS signatures of verification nodes on the execution receipt contents
result_approval_signaturesBLS signatures of verification nodes on the result approval contents

Block Status


_10
enum BlockStatus {
_10
UNKNOWN = 0;
_10
FINALIZED = 1;
_10
SEALED = 2;
_10
}

ValueDescription
UNKNOWNThe block status is not known.
FINALIZEDThe consensus nodes have finalized the block
SEALEDThe verification nodes have verified the block

Collection

A collection is a batch of transactions that have been included in a block. Collections are used to improve consensus throughput by increasing the number of transactions per block.


_10
message Collection {
_10
bytes id
_10
repeated bytes transaction_ids
_10
}

FieldDescription
idSHA3-256 hash of the collection contents
transaction_idsOrdered list of transaction IDs in the collection

Collection Guarantee

A collection guarantee is a signed attestation that specifies the collection nodes that have guaranteed to store and respond to queries about a collection.


_10
message CollectionGuarantee {
_10
bytes collection_id
_10
repeated bytes signatures
_10
}

FieldDescription
collection_idSHA3-256 hash of the collection contents
signaturesBLS signatures of the collection nodes guaranteeing the collection

Transaction

A transaction represents a unit of computation that is submitted to the Flow network.


_23
message Transaction {
_23
bytes script
_23
repeated bytes arguments
_23
bytes reference_block_id
_23
uint64 gas_limit
_23
TransactionProposalKey proposal_key
_23
bytes payer
_23
repeated bytes authorizers
_23
repeated TransactionSignature payload_signatures
_23
repeated TransactionSignature envelope_signatures
_23
}
_23
_23
message TransactionProposalKey {
_23
bytes address
_23
uint32 key_id
_23
uint64 sequence_number
_23
}
_23
_23
message TransactionSignature {
_23
bytes address
_23
uint32 key_id
_23
bytes signature
_23
}

FieldDescription
scriptRaw source code for a Cadence script, encoded as UTF-8 bytes
argumentsArguments passed to the Cadence script, encoded as JSON-Cadence bytes
reference_block_idBlock ID used to determine transaction expiry
proposal_keyAccount key used to propose the transaction
payerAddress of the payer account
authorizersAddresses of the transaction authorizers
signaturesSignatures from all signer accounts

The detailed semantics of transaction creation, signing and submission are covered in the transaction submission guide.

Proposal Key

The proposal key is used to specify a sequence number for the transaction. Sequence numbers are covered in more detail here.

FieldDescription
addressAddress of proposer account
key_idID of proposal key on the proposal account
sequence_numberSequence number for the proposal key

Transaction Signature

FieldDescription
addressAddress of the account for this signature
key_idID of the account key
signatureRaw signature byte data

Transaction Status


_10
enum TransactionStatus {
_10
UNKNOWN = 0;
_10
PENDING = 1;
_10
FINALIZED = 2;
_10
EXECUTED = 3;
_10
SEALED = 4;
_10
EXPIRED = 5;
_10
}

ValueDescription
UNKNOWNThe transaction status is not known.
PENDINGThe transaction has been received by a collector but not yet finalized in a block.
FINALIZEDThe consensus nodes have finalized the block that the transaction is included in
EXECUTEDThe execution nodes have produced a result for the transaction
SEALEDThe verification nodes have verified the transaction (the block in which the transaction is) and the seal is included in the latest block
EXPIREDThe transaction was submitted past its expiration block height.

Account

An account is a user's identity on Flow. It contains a unique address, a balance, a list of public keys and the code that has been deployed to the account.


_10
message Account {
_10
bytes address
_10
uint64 balance
_10
bytes code
_10
repeated AccountKey keys
_10
map<string, bytes> contracts
_10
}

FieldDescription
addressA unique account identifier
balanceThe account balance
codeThe code deployed to this account (deprecated, use contracts instead)
keysA list of keys configured on this account
contractsA map of contracts or contract interfaces deployed on this account

The code and contracts fields contain the raw Cadence source code, encoded as UTF-8 bytes.

More information on accounts can be found here.

Account Key

An account key is a reference to a public key associated with a Flow account. Accounts can be configured with zero or more public keys, each of which can be used for signature verification when authorizing a transaction.


_10
message AccountKey {
_10
uint32 id
_10
bytes public_key
_10
uint32 sign_algo
_10
uint32 hash_algo
_10
uint32 weight
_10
uint32 sequence_number
_10
bool revoked
_10
}

FieldDescription
idIndex of the key within the account, used as a unique identifier
public_keyPublic key encoded as bytes
sign_algoSignature algorithm
hash_algoHash algorithm
weightWeight assigned to the key
sequence_numberSequence number for the key
revokedFlag indicating whether or not the key has been revoked

More information on account keys, key weights and sequence numbers can be found here.

Event

An event is emitted as the result of a transaction execution. Events are either user-defined events originating from a Cadence smart contract, or built-in Flow system events.


_10
message Event {
_10
string type
_10
bytes transaction_id
_10
uint32 transaction_index
_10
uint32 event_index
_10
bytes payload
_10
}

FieldDescription
typeFully-qualified unique type identifier for the event
transaction_idID of the transaction the event was emitted from
transaction_indexZero-based index of the transaction within the block
event_indexZero-based index of the event within the transaction
payloadEvent fields encoded as JSON-Cadence values

Execution Result

Execution result for a particular block.


_10
message ExecutionResult {
_10
bytes previous_result_id
_10
bytes block_id
_10
repeated Chunk chunks
_10
repeated ServiceEvent service_events
_10
}

FieldDescription
previous_result_idIdentifier of parent block execution result
block_idID of the block this execution result corresponds to
chunksZero or more chunks
service_eventsZero or more service events

Chunk

Chunk described execution information for given collection in a block


_10
message Chunk {
_10
bytes start_state
_10
bytes event_collection
_10
bytes block_id
_10
uint64 total_computation_used
_10
uint64 number_of_transactions
_10
uint64 index
_10
bytes end_state
_10
}

FieldDescription
start_stateState commitment at start of the chunk
event_collectionHash of events emitted by transactions in this chunk
block_idIdentifier of a block
total_computation_usedTotal computation used by transactions in this chunk
number_of_transactionsNumber of transactions in a chunk
indexIndex of chunk inside a block (zero-based)
end_stateState commitment after executing chunk

Service Event

Special type of events emitted in system chunk used for controlling Flow system.


_10
message ServiceEvent {
_10
string type;
_10
bytes payload;
_10
}

FieldDescription
typeType of an event
payloadJSON-serialized content of an event

Subscriptions

SubscribeEvents

SubscribeEvents streams events for all blocks starting at the requested start block, up until the latest available block. Once the latest is reached, the stream will remain open and responses are sent for each new block as it becomes available.

Events within each block are filtered by the provided EventFilter, and only those events that match the filter are returned. If no filter is provided, all events are returned.

Responses are returned for each block containing at least one event that matches the filter. Additionally, heatbeat responses (SubscribeEventsResponse with no events) are returned periodically to allow clients to track which blocks were searched. Clients can use this information to determine which block to start from when reconnecting.


_10
rpc SubscribeEvents(SubscribeEventsRequest) returns (stream SubscribeEventsResponse)

Request


_10
message SubscribeEventsRequest {
_10
bytes start_block_id
_10
uint64 start_block_height
_10
EventFilter filter
_10
uint64 heartbeat_interval
_10
entities.EventEncodingVersion event_encoding_version
_10
}

FieldDescription
start_block_idThe first block to search for events. Only one of start_block_id and start_block_height may be provided, otherwise an InvalidArgument error is returned. If neither are provided, the latest sealed block is used
start_block_heightBlock height of the first block to search for events. Only one of start_block_id and start_block_height may be provided, otherwise an InvalidArgument error is returned. If neither are provided, the latest sealed block is used
filterFilter to apply to events for each block searched. If no filter is provided, all events are returned
heartbeat_intervalInterval in block heights at which the server should return a heartbeat message to the client
event_encoding_versionPreferred event encoding version of the block events payload. Possible variants: CCF, JSON-CDC

Response


_10
message SubscribeEventsResponse {
_10
bytes block_id
_10
uint64 block_height
_10
repeated entities.Event events
_10
google.protobuf.Timestamp block_timestamp
_10
}

SubscribeExecutionData

SubscribeExecutionData streams execution data for all blocks starting at the requested start block, up until the latest available block. Once the latest is reached, the stream will remain open and responses are sent for each new execution data as it becomes available.


_10
rpc SubscribeExecutionData(SubscribeExecutionDataRequest) returns (stream SubscribeExecutionDataResponse)

Request


_10
message SubscribeExecutionDataRequest {
_10
bytes start_block_id
_10
uint64 start_block_height
_10
entities.EventEncodingVersion event_encoding_version
_10
}

FieldDescription
start_block_idThe first block to get execution data for. Only one of start_block_id and start_block_height may be provided, otherwise an InvalidArgument error is returned. If neither are provided, the latest sealed block is used
start_block_heightBlock height of the first block to get execution data for. Only one of start_block_id and start_block_height may be provided, otherwise an InvalidArgument error is returned. If neither are provided, the latest sealed block is used
event_encoding_versionPreferred event encoding version of the block events payload. Possible variants: CCF, JSON-CDC

Response


_10
message SubscribeExecutionDataResponse {
_10
uint64 block_height
_10
entities.BlockExecutionData block_execution_data
_10
google.protobuf.Timestamp block_timestamp
_10
}

Execution data

EventFilter

EventFilter defines the filter to apply to block events. Filters are applied as an OR operation, i.e. any event matching any of the filters is returned. If no filters are provided, all events are returned. If there are any invalid filters, the API will return an InvalidArgument error.


_10
message EventFilter {
_10
repeated string event_type
_10
repeated string contract
_10
repeated string address
_10
}

FieldDescription
event_typeA list of full event types to include.
Event types have 2 formats:
_ Protocol events: flow.[event name]
_ Smart contract events: A.[contract address].[contract name].[event name]
contractA list of contracts who's events should be included. Contracts have the following name formats:
_ Protocol events: flow
_ Smart contract events: A.[contract address].[contract name]
This filter matches on the full contract including its address, not just the contract's name
addressA list of addresses who's events should be included. Addresses must be Flow account addresses in hex format and valid for the network the node is connected to. i.e. only a mainnet address is valid for a mainnet node. Addresses may optionally include the 0x prefix