Byzantine Node Attack Response

Flow, like most blockchains, forms an open decentralized peer-to-peer network between all of the nodes on the network. Due to its decentralized nature, there is a potential for nodes to behave maliciously (byzantine) and intentionally try to harm the network. There are a variety of protections within the node software to deal with invalid messages - message signatures, sender authorization, payload validation, etc. These protections guard the network against many types of attacks. However, there could still be a byzantine node that spams other nodes in the network with invalid messages at volumes that are intended to impact node performance. While this will not compromise the security of the network it could impact network liveness.

This guide explains how to detect such a node and what actions you should take as a node operator to deal with such byzantine nodes.

Responding to an attack from a byzantine node requires the following:

Immediate action to block network traffic originating from the byzantine node to your node.
Raising a governance FLIP to remove the node from the network as described in this FLIP.
A service account transaction to set the node weight to 0.

This guide focuses on the first action.

Admin Server

Flow nodes have an admin server which exposes a simple REST API for interacting with the node. See the README for some useful examples. It is disabled by default.

Enable the Admin Server

To enable to admin server,

Add the following option to the node's CLI flags.

--admin-addr=localhost:9002

Note: The port does not have to be 9002. You can choose any free port.

⚠️ Do NOT expose the port outside the machine and always use localhost:port

Reboot the node to apply the new setting. You can then verify it’s working by logging into the machine via ssh and running,

curl localhost:9002

This should return a json response message as below.

{"code":5,"message":"Not Found","details":[]}

If you instead get a connection rejected message then it’s not configured correctly.

Detecting a Byzantine Node

There are 2 general categories of byzantine attacks:

Safety attacks - are attacks where a node attempts to corrupt or modify the state of the blockchain outside of normal protocol rules.
Liveness attacks - sometimes called spamming attacks, are when a node attempts to disrupt the network by abusing their access to waste network and node resources. This generally results in degraded performance.

Flow nodes are protected against safety attacks, but liveness attacks are extremely difficult to completely prevent. To close the gap, we rely on coordination between node operators to detect and block abusive nodes.

Metrics

Flow nodes generate a variety of metrics that can be used to measure the node's performance and identify abnormal behavior. Most metrics are only useful in the context of "normal" operation, so it is a good idea to regularly review them to build an understanding of what is "normal".

Metrics to watch:

CPU, memory, network connections, network I/O, file descriptors
network_authorization_* - counts the number of unauthorized/invalid messages received
network_queue_message_queue_size - measures the number of incoming messages waiting to be processed
network_engine_messages_received_total - measures the number of messages received from the network

There are many other metrics, but these are a good starting point. If you notice any anomalous trends, review the logs for additional context.

Logs

Log events related to suspicious activity are logged with the label "suspicious":true. This is helpful to identify the most relevant logs, but there are legitimate cases when these logs are emitted, so they cannot be used as a definitive indicator of malicious activity. Two examples of expected log messages are:

rejected inbound connection - You may see this error if an operator unstaked their node between sporks, but never shut it down. The node will continue to operate as usual, but peers will not have it in their identity table and will (correctly) reject incoming connections.
middleware does not have subscription for the channel ID indicated in the unicast message received - This is commonly logged during node startup when receiving messages before all of the components have finished registering their channels with the network layer. It is NOT expected after startup.

The following is an example of a log message indicating an Access node attempted to send a message it is not authorized to send:

{
    "level": "error",
    "node_role": "collection",
    "node_id": "4a6f7264616e20536368616c6d00a875801849f2b5bea9e9d2c9603f00e5d533",
    "module": "network_slashing_consumer",
    "peer_id": "QmY2kby3xt3ugu2QqJP5w24rP4HSakYgDFpAJy1ifSRkF7",
    "networking_offense": "unauthorized_sender",
    "message_type": "messages.BlockProposal",
    "channel": "sync-committee",
    "protocol": "publish",
    "suspicious": true,
    "role": "access",
    "sender_id": "f9237c896507b8d654165c36b61c9a3080e6dd042dea562a4a494fbd73133634",
    "time": "2023-01-24T21:10:32.74684667Z",
    "message": "potential slashable offense: sender role not authorized to send message on channel"
}

Identifying the Source of Malicious Traffic

Most log messages include either the node ID or peer ID. Peer ID is the ID used to identify nodes on by the libp2p library. Peer IDs are derived from the node's networking public key, so there is a 1:1 mapping between node ID and peer ID.

The two simplest ways to match a node ID to a peer ID:

inbound connection established and outbound connection established log messages contain both the node and peer IDs
The following admin command will return the node info for a given peer ID:

curl localhost:9002/admin/run_command \
  -H 'Content-Type: application/json' \
  -d '{"commandName": "get-latest-identity", "data": { "peer_id": "QmY2kby3xt3ugu2QqJP5w24rP4HSakYgDFpAJy1ifSRkF7" }}'

If you cannot find any log messages at the current log level, you may need to enable debug logging. See the admin server's README for an example.

Reporting the Byzantine Node

Report the suspicious node on Discord in the #flow-validators-alerts channel along with all the evidence you have collected (log messages, other networking related metrics, etc). This will alert other node operators who can review their nodes to corroborate the report. Using evidence from multiple operators, a consensus can be reached about the suspicious node, and appropriate action can be taken.

Blocking a Byzantine Node

Once a consensus is reached about the suspicious node on Discord among the node operators, the suspicious node can be blocked using the admin command.

curl localhost: 9002/admin/run_command \
  -H 'Content-Type: application/json' \
  -d '{"commandName": "set-config","data": {"network-id-provider-blocklist": ["<suspcious node id>"]}}

After blocking the node, all traffic coming from the node will be rejected and you should only see logs about reject messages and connections for that node ID.

Unblocking a Node

If you need to unblock a node, you can use the same command to remove the node ID from the blocklist. Simply run it again with an empty list to remove all blocked nodes, or an existing list with the specific node ID you want to unblock removed.

The following command returns a list of the currently blocked nodes.

curl localhost: 9002/admin/run_command \
  -H 'Content-Type: application/json' \
  -d '{"commandName": "get-config", "data": "network-id-provider-blocklist"}

After unblocking the node, connections and traffic coming from the node should resume.

Admin Server​

Enable the Admin Server​

Detecting a Byzantine Node​

Metrics​

Logs​

Identifying the Source of Malicious Traffic​

Reporting the Byzantine Node​

Blocking a Byzantine Node​

Unblocking a Node​